Thermal-Hanger

Thermal-Hanger Shield Inserts

A. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

1.  Buckaroos, Inc.
2. CADDY; brand of nVent Electrical pic.
3. Carpenter & Paterson, Inc.
4. KB Enterprise, Corp. Snappitz .
5. National Pipe Hanger Corporation.
6. Pipe Shields Inc.
7. Piping Technology & Products, Inc.
8. Rilco Manufacturing Co., Inc.
9. Value Engineered Products, Inc.

B. Insulation-Insert Material for Cold Piping: ASTM C552, Type II cellular glass with 100-psi or ASTM C591, Type VI, Grade 1 polyisocyanurate with 125-psi minimum compressive strength and vapor barrier.

C. Insulation-Insert Material for Hot Piping: ASTM C552, Type II cellular glass with 100-psi or ASTM C591, Type VI, Grade 1 polyisocyanurate with 125-psi minimum compressive strength.

D. For Trapeze or Clamped Systems: Insert and shield shall cover entire circumference of pipe. E. For Clevis or Band Hangers: Insert and shield shall cover lower 180 degrees of pipe.